FIBTOP 100 is an advanced sub floor smoothing compound. It is virtually tension free & designed to rapidly level & smooth hard sub floors prior to applying a floor finish. Used in conjunction with either or Fibfloor Cem Primer, FIBTOP 100 can be applied old sub floors, e.g. floor screeds & other hard and rigid bases. FIBTOP 100 is a grey powder consisting of special cements and high quality synthetic resins. When mixed with water, a fluid, self-leveling mortar is produced which can be applied from a feather edge up to the required thickness in one operation. For thicknesses greater than 10mm, incorporate Fibrex aggregate in the mixed mortar, FIBTOP 100 can normally be walked on after approx. 2 hours at 27 ± 1ºC and dries and hardens rapidly so that even thick applications are ready to receive floor coverings within one day at 27 ± 1ºC.
FACTS
AREAS OF APPLICATION
FIBTOP 100 will level and smooth, in a single
Application of:
Internal sub-floors of concrete, cement/sand, quarry
tiles, etc.
Prior to the installation of floor coverings.
Applications include smoothing tamped, uneven,
damaged or rained-on insitu concrete sub-floors,
adjusting tolerances or camber problems between
floors, slabs or pre-cast concrete as well as
smoothing old sub-floors and screeds in renovation
projects.
FIBTOP -100 is especially useful where the installation
& time of the floor finish must be kept to a minimum.